1.　网络拓扑和相应设计

目录:

网络配置实例

网络拓扑和相应设计

Catalyst 5509 配置

Catalyst 4003　配置

RSM　配置

Catalyst 5505　配置

网络拓扑和相关设计

网络拓扑图

　

　

　

　

　

　

2.　Catalyst 5509 的配置

下面列出 Catalyst 5509 的基本配置

Enter password:

Console> enable

Enter password:

Console> (enable) set system name 5509-ER-F1

System name set.

5509-ER-F1> (enable) set system location 1st Floor Equipment Room

System location set.

5509-ER-F1> (enable) set system contact sysadmin@bigcorp.com

System contact set.

5509-ER-F1> (enable) set time 04/30/1999 9:30:00

Fri Apr 30 1999, 09:30:00

5509-ER-F1> (enable) set password

Enter old password:

Enter new password:

Retype new password:

Password changed.

5509-ER-F1> (enable) set enablepass

Enter old password:

Enter new password:

Retype new password:

Password changed.

5509-ER-F1> (enable) set banner motd %

5509-ER-F1 (Catalyst 5509)

Access Restricted

%

MOTD banner set

5509-ER-F1> (enable) set interface sc0 10.10.1.10/24

Interface sc0 IP address set.

5509-ER-F1> (enable) set ip route default 10.10.1.1

Route added.

5509-ER-F1> (enable) set ip dns server 10.10.10.100

10.10.10.100 added to DNS server table as primary server.

5509-ER-F1> (enable) set ip dns domain bigcorp.com

Default DNS domain name set to bigcorp.com

5509-ER-F1> (enable) set ip dns enable

DNS is enabled

5509-ER-F1> (enable) set vtp domain BigCorp mode server

VTP domain BigCorp modified

5509-ER-F1> (enable) set vlan 10 name Corporate

Vlan 10 configuration successful

5509-ER-F1> (enable) set vlan 20 name DevEng

Vlan 20 configuration successful

5509-ER-F1> (enable) set vlan 30 name Mfg

Vlan 30 configuration successful

5509-ER-F1> (enable) set vlan 40 name QA

Vlan 40 configuration successful

5509-ER-F1> (enable) set vlan 50 name Finance&Admin

Vlan 50 configuration successful

5509-ER-F1> (enable) set vlan 60 name Sales&Mktg

Vlan 60 configuration successful

5509-ER-F1> (enable) set module name 1 Supervisor III

Module name set.

5509-ER-F1> (enable) set port flowcontrol 1/1-2 send off

Ports 1/1-2 flow control send administration status set to off

(ports will not send flowcontrol to far end)

5509-ER-F1> (enable) set port flowcontrol 1/1-2 receive off

Ports 1/1-2 flow control receive administration status set to off

(ports will not allow far end to send flowcontrol)

5509-ER-F1> (enable) set port negotiation 1/1-2 enable

Ports 1/1-2 negotiation enabled

5509-ER-F1> (enable) set port name 1/1-2 GEC 802.1Q Trunk

Ports 1/1-2 name set.

5509-ER-F1> (enable) set port channel 1/1-2 desirable

Port(s) 1/1-2 channel mode set to desirable.

5509-ER-F1> (enable) set trunk 1/1 desirable dot1q

Port(s) 1/1 trunk mode set to desirable.

Port(s) 1/1 trunk type set to dot1q.

5509-ER-F1> (enable) set module name 3 RSM (RSM-ER-F1)

Module name set.

5509-ER-F1> (enable) set module name 5 Fast Ether Uplinks